Specification | Description |
---|---|
Machining Stroke ( X x Y x Z ) | 19.7" x 13.8" x 11.8" |
Machining Stroke ( U x V ) | +/- 1.25" |
Table Size | 30.7" x 24.8" |
Tank Dimensions | 42" x 32" x 12" |
Maximum Workpiece Size | 41.3" x 31.4" x 11.6" |
Maximum Workpiece Weight | 3,300 lbs |
Taper Capacity | +/-30 Degrees |
Taper Angle @ Thickness | 15 deg @ 3.93" |
Rapid Rate | 51 ipm |
Maximum Drive Unit / Resolution | 0.00001mm / 2 Millionths |
Wire Diameter Capability | .004" - .012" |
Wire Guides Included | .012" |
Max. Wire Spool Size | 22 lbs |
Min Hole Diameter | .02" |
Dielectric Water Capacity | 190 gal |
Electrical Requirements | 200V-220V VAC/60Hz/3Ph 13.5KVa |
Air Requirements | 71-100 PSI w/2.7 cu ft/min |
Machine Tool Shipping Dimensions | 74" x 103" x 84"H |
Machine Tool Shipping Weight | 7,700 lbs |
Approximate Machine Total Footprint | 102" LR x 104"FB x 84"H |
Approximate Machine System Weight | 9,116 lbs |
Hitech Machinery Sales, Inc
720 N 17th St Unit 3
St Charles, IL 60174
(630) 443-7865
(630) 443-9404
sales@hitechmachinery.com