Chmer A322S Wire EDM (2009)

Chmer A322S Wire EDM (2009)

Stock Number: 0865

Chmer A322S

Age: 2009

Condition: As Is, Where Is



                    
Click to view larger photo

Request A Quote On Our Stock Number: 0865 Chmer A322S Wire EDM (2009)Request a quote on stock# 0865
SpecificationDescription
Machining Stroke ( X x Y x Z )13.8" x 9.8" x 8.6"
Table Size23.2" x 20.2"
Maximum Workpiece Size31.5" x 22" x 8.5"
Maximum Workpiece Weight770 lbs
Machining Stroke ( U x V )2.4" x 2.4"
Taper Capacity+-30 deg max / ±14.5deg @3.25"
Wire Diameter Range Possible0.006"-0.012"
Minimum Resolution.000040"
Dielectric Tank Capacity126 Gal
Electrical Requirements220V ± 5% / 3 Phz / 13 kVa
Approximate Overall Dimensions83" x 85" x 81"H
Approximate Machine Weight4,400 lbs

Equipped With:
* Industrial PC Controller w/15" TFT Display * Automatic Wire Threader * Submerged Machining Capability * AC Servo Drives w/Rotary Encoders on All Five Axes * Fine-Finish Circuitry (OV) * Automatically Thread or Rethread Through the Slot or Start Hole, Submerged < 10 Seconds. * Corner Control * Special Wire Annealing and Wire Cutting System * Self-Cleaning and Self-Lubricating Lower Arm Seal * Built-in Lubrication System * 3D or Single Step Simulation * Electric Chiller * All Available Manuals and Accessories


HomeIndexContact


Chmer A322S Wire EDM (2009)
Hitech Machinery Sales, Inc
720 N 17th St Unit 3
St Charles, IL 60174
(630) 443-7865
(630) 443-9404
sales@hitechmachinery.com



Asset Sales and Marketing Software for Used and Surplus Industrial Machinery and Equipment Dealers
www.MacDB2000.com