Key Features
* Four sided table with universal clamping frame.
* Wire sizes from 0.006" - 0.013".
* Finishes of 0.2 Ra. (8 micro inch)
* ACvision 5 control runs on Windows XP. This control delivers more power with less space required.
* IPG-VPC Dual Generator has 2 in series power modules in a modern design and technology that delivers finer spark gap for better part accuracy and surface finish. It also has low power consumption and takes up a minimum amount of space.
* ACjogger is a handy, manual operations hand box. Use it for set up functions, axis movements, cycle start/stop and emergency stop.
* ACsetup 3D - includes a probing system that actually sets the machine axis up to the part orientation. It checks the top surface of a workpiece and programs the angle of the EDM wire to be perpendicular to the A/B angle of the workpiece. After the wire is square to the work being machined, the wire picks up a specified side surface and then rotates the program to match the C-skew of the block. The system then uses the wire to pick up a reference on the workpiece using one of the pick-up macros in ACvision. These values are automatically loaded into the control under your specific file name. This feature can be programmed off-line and executed unattended. ACsetup 3D saves an average of 20 minutes per part when compared to traditional indicator methods of workpiece set up.
* Pieceinsert control feature allows the "pausing" of a job in progress in order to "insert" and machine another (emergency) workpiece, with the click of a mouse. When finished, you can automatically return to the exact point where the previous job was paused and "resume" erosion.
* Contact Manager - Access your GF AgieCharmilles EDM off-line through the standard Ethernet connection. This unique feature enables the user to monitor or run the GF AgieCharmilles system from a remote location. It also provides for real time support from the local applications and service agent.
A Youtube video of this machine operating can be seen at:
https://youtu.be/c5NJaXzzjcE
Request a quote on stock# 0825
