System 3R Wire EDM 3P Set 3R-218S $2,250
Stock Number: 8549
System 3R 3R-218S
Condition: As Is, Where Is
Click to view larger photo
Request a quote on stock# 8549
Equipped With:
3R-218S System 3R Wire EDM 3P Set (3R-218/20)
Minimal risk of collision with three-point clamping.
3P is equally well suited to rectangular or round
workpieces. Clamping takes only a few seconds.
3P has been developed for medium-sized and large
workpieces in wire EDM machines with an L-shaped
or U-shaped machine table, as well as in machines
with a frame table. The holders are matched to
the size of the workpiece by sliding them along the
reference element. The holders can be adjusted
vertically.
+ Can be aligned in the machine
+ Gives great flexibility
+ Excellent value for money
+ Easy cleaning
+ Mounting on or above the zero line of the machine.
Set of three holders and clamping parts.
Tightening torque 7 Nm
Reversible jaws
Holder length 70/23.5 mm.
Recommended maximum workpiece weight 60kg (132 lbs).
Weight per set 3kg (6.6 lbs).
Toe clamps and screws shown are included.
* Dovetail rails shown in the picture are not included with the purchase, but may still be available at an additional price.
These items have been checked out and are in good used condition.
1 Set Available
Hitech Machinery Sales, Inc
720 N 17th St Unit 3
St Charles, IL 60174
(630) 443-7865
(630) 443-9404
sales@hitechmachinery.com
Asset Sales and Marketing Software for Used and Surplus Industrial Machinery and Equipment Dealers
www.MacDB2000.com
