Charmilles Roboform 550Y GammaTec CNC Sinker EDM
Stock Number: 1513
Charmilles Roboform 550Y
Age: 2007
Condition: As Is, Where Is
The Charmilles Roboform 550 utilizes a Windows-based Dynamic Process Control (DPControl) system, which provides graphics to illustrate all machining operations and electronic manuals that let operator receive information about current function in manufacturing process. DPControl also suggests ideal electrode undersize, rationalizes number of electrodes needed, and organizes job sequencing according to preset priorities.
GammaTec
Pushing further the EDM performance in term of speed, wear and fine surface roughness by adding a premix concentrate GammaMIX 50, to the standard dielectric fluid.
Has an extended dielectric circuit to insure continuous and appropriate machining conditions as well as avoiding settling of the additive. It consists of
additional valves, tubes, nozzles and a special deflector channel in the work tank.
Beside the additive and the extended dielectric circuit, the integrates dedicated technologies which enable to reach a shiny surface finish of CH6/Ra 0.2
mm even on large surface areas. DPControl automatically generates the machining strategies according to the operator input.
Two machines in one;
This allows the machine to work either in a conventional way (w/o GammaMIX) or with the premix concentrate (GammaMIX). To do so, you simply select the appropriate dielectric circuit (filtration or circulation) and define inside the DPControl in which configuration you want to work (Standard or GammaTEC).
Click to view larger photo
Request a quote on stock# 1513
| Specification | Description |
|---|
| X-Axis Travel | 23.62" |
| Y-Axis Travel | 15.75" |
| Z-Axis Travel | 17.72" |
| Table Size | 29" x 24" |
| Work Tank Size | 48" x 34" x 18" |
| Max Table Weight | 3,528 lbs |
| AEC Capacity | 30 Positions |
| Dielectric Capacity | 216 Gallons |
| Machine Dims | 108" x 124" x 118" |
| Machine Weight | 9,700 lbs |
Equipped With:
* Charmilles CNC Controller
* C-Axis (System 3R Macro Combi)
* 30 Position Automatic Electrode Changer
* 128 Amp Generator
* GammaTec - Graphite Slurry Finishing Capability
* Micro Machining Capability
* Drop Tank Design
* Remote Hand Control
* Transformer
* All Available Manuals and Accessories
* Table magnets and 3R Tooling shown are NOT included with the machine
Hitech Machinery Sales, Inc
720 N 17th St Unit 3
St Charles, IL 60174
(630) 443-7865
(630) 443-9404
sales@hitechmachinery.com
Asset Sales and Marketing Software for Used and Surplus Industrial Machinery and Equipment Dealers
www.MacDB2000.com
