Mitsubishi EX8 CNC Sinker EDM (1997)
Stock Number: 1506
Mitsubishi EX8
Age: 1997
Condition: As Is, Where Is
The Mitsubishi EX series comes standardly equipped with the "Fuzzy Logic" control that automatically adjusts machining conditions and incorporates the knowledge of a highly skilled operator. It does this by detecting minute variations in the workzone through the use of a high performance sensor (MF) and a 32-bit microprocessor. The FP power supply dramatically reduces finishing time, minimizes excessive wear and poor finish due to machining waste and excels while doing large-area finishing applications. All of this in a small, space saving design that will work in almost any toolroom.
Click to view larger photo
Request a quote on stock# 1506
| Specification | Description |
|---|
| Machining Travels ( X x Y x Z ) | 11.81" x 9.84" x 9.84" |
| Machining Travels (C) | 0-360 deg |
| Table Size | 21.65" x 13.77" |
| Worktank Size | 24.08" x 16.53" x 15.9" |
| Maximum Workpiece Size | 35.43" x 23.62" x 11.81" |
| Maximum Workpiece Weight | 1,200 lbs |
| Maximum Current | 60 Avg Amps/80 Peak Amps |
| Electrode Positions (Macro Std) | 16 |
| Maximum Electrode Weight | 55 lbs |
| Dielectric Oil Capacity | 37 gal |
| Electrical Requirements | 200-220V/3Phz/60Hz |
| Machine Dimensions | 90" x 88" x 80"H |
| Machine Weight | 2,640 lbs |
Equipped With:
* Mitsubishi Fuzzy Logic Control
* C-Axis (System 3R Macro Std)
* 16 Position Automatic Electrode Changer
* FP60E Power Supply
* Dielectric Filtration System
* Electric Chiller
* All Available Manuals and Accessories
** Electrode holders pictured are NOT included with the machine.
Hitech Machinery Sales, Inc
720 N 17th St Unit 3
St Charles, IL 60174
(630) 443-7865
(630) 443-9404
sales@hitechmachinery.com
Asset Sales and Marketing Software for Used and Surplus Industrial Machinery and Equipment Dealers
www.MacDB2000.com
